Make Sure Your Heat Works Before You Need It.
Furnace maintenance
Heating systems don’t get much use here. That’s exactly why they need a check-up.
Over a long summer, dust settles on burners and sensors, ignitors age, and small problems sit unnoticed. Then the first cold night arrives, the thermostat flips to heat, and you find out whether everything still works.
A fall tune-up means you find out on our schedule, not the weather's.
Furnace maintenance gives a technician time to clean, test, and inspect your heating system, check its safety controls, and tell you about anything that needs attention before you’re depending on it.
Fewer no-heat surprises on cold nights
Safety controls and venting checked before the season
Worn ignitors and dirty sensors caught early
A cleaner, more efficient system
What's included
Furnace care is hands-on work.
Here’s what our technicians check on a heating inspection:
Inspect filters, then clean or replace them
Check heat pumps in heating mode and defrost operation
Check electric heat operation and amps
Check indoor blower operation
Check gas pressure and the gas valve
Check burners and vacuum them if needed
Clean and adjust the pilot assembly
Check safeties on all heating units
Check for gas leaks
Check the heat exchanger
Check the induced draft motor and pressure switch
Check the performance of the total system
When to schedule
In Victoria, TX & Surrounding Areas, that usually means early fall.
Schedule before the first real cold front and you’ll avoid the rush of no-heat calls that follow it. Our heating checks run from late September through mid-December. And with the AAA Service Contract, your heating inspection in fall and cooling inspection in spring are both scheduled for you, with 10% off parts and labor.
Signs it's overdue
Not sure when it was last serviced? These are good clues.
Between visits
A few simple habits make a real difference between tune-ups.
Change your furnace filter
Check it monthly while the heat is running and replace it when it looks dirty. A clogged filter is one of the most common reasons a furnace overheats and shuts itself off. The size is printed on the frame, and the arrow points toward the blower.
Keep the area around the furnace clear
Don’t store boxes, paint, cleaners, or anything flammable near the unit.
Keep vents and returns open
Blocked registers and closed vents restrict airflow and make the furnace work harder.
Test your carbon monoxide detectors
Do it every fall when you switch to heat, and replace the batteries as needed.
Why homeowners choose AAA
Experience with repairs makes for better maintenance.
When the technician doing your tune-up also diagnoses and installs heating systems, they know which worn parts are about to cause trouble and which can wait. And we’ll tell you honestly which is which.
Related services
AC Maintenance
Pair your fall furnace tune-up with a spring AC check.
Learn more
Furnace Repair
Already having a problem? We’ll diagnose and fix it.
Learn more
Heat Pump Services
Heat pumps need maintenance in every season.
Learn more
Air Duct Cleaning
Keep dust from circulating through the system you just had serviced.
Learn more
Furnace Installation
When maintenance can’t keep an old furnace going.
Learn more
Furnace maintenance service area
AAA Air Conditioning Inc. is based at 175 Skyline Rd in Victoria, TX and provides furnace tune-ups and heating maintenance throughout Victoria, TX & Surrounding Areas.
Victoria, TX
Home Base
Cuero, TX
Port Lavaca, TX
Refugio, TX
Goliad, TX
Edna, TX
Hallettsville, TX
Ganado, TX
Gonzales, TX
We serve Victoria, TX & Surrounding Areas. Don’t see your town listed? Call (361) 578-3846 and ask.
Once a year is the common recommendation, ideally in early fall before you start using the heat.
Yes. Light use doesn’t stop dust from building up on burners and sensors, or parts from aging. A furnace that sits for months is often the one that won’t light on the first cold night.
Cleaning is part of a tune-up. Maintenance also includes testing the ignition, safety controls, blower, electrical, and thermostat, plus an inspection of the heat exchanger and venting.
It depends on the filter, your home, and how much the system runs. Check it monthly during heavy use and replace it when it looks dirty. Many standard 1-inch filters need changing every one to three months.
No. Parts can fail without warning. Maintenance gives you the best chance to catch problems early and go into winter with a system that’s been checked.
Yes. See our Heat Pump Services and AC Maintenance pages.
A tune-up in the fall is a lot easier to schedule than a repair on the coldest night of the year.
Call AAA Air Conditioning Inc. for furnace maintenance in Victoria, TX & Surrounding Areas.
AAA Air Conditioning Inc. 175 Skyline Rd, Victoria, TX 77905 • Monday–Friday, 8:00 AM–5:00 PM • TACLA #44243C