- Monday–Friday, 8:00 AM–5:00 PM
- 175 Skyline Rd, Victoria, TX 77905
Heat Back On. Problem Actually Solved.
Heater repair in Victoria, TX & Surrounding Areas
A cold house gets old fast.
Heating systems in Victoria, TX & Surrounding Areas can sit unused for months, then get switched on the first night a cold front comes through. That long break is when ignitors weaken, flame sensors get dirty, and small electrical problems go unnoticed. So the first cold night is often when they show up.
Good furnace repair starts with finding the real cause.
A furnace that won’t heat can have a dozen possible causes, from something as simple as a tripped safety switch to a failed control board. Our technicians test the system, tell you what they found in plain language, and walk you through your options before any repair begins.
If it’s a quick fix, we’ll handle it and get the heat back on.
If a part like the ignitor or blower motor has failed, we’ll explain the repair and what it costs.
If the furnace has a safety concern, we’ll tell you straight and help you decide what to do.
If the same problem keeps coming back, we’ll dig into why instead of patching it again.
Common heating problems
Most heater repair calls start with one of a few symptoms.
Here’s what each one can mean, and what we look at when we get there.
No heat
Nothing happens when you turn up the thermostat. The cause might be power, the thermostat, a safety switch, the control board, or the ignition system. Testing narrows it down.
Cold air
The blower runs but the air never warms up. That usually means the burners aren’t lighting or are shutting off early, often because of an ignition, flame sensor, or airflow problem.
Ignition
A furnace that clicks, tries to light, and gives up often has a worn ignitor or a dirty flame sensor. Furnace ignitor replacement is one of the more common heating repairs, and usually one of the simpler ones.
Cycling
Short cycling can come from overheating caused by a clogged filter or blocked airflow, a failing limit switch, a flame sensor problem, or thermostat trouble. It’s hard on the equipment, so it’s worth checking.
Airflow
Weak airflow, a humming sound, or a blower that won’t stop running can point to the blower motor, its capacitor, or the controls that run it.
Noises & smells
Banging, squealing, rattling, or a burning smell that lingers past the first few minutes are signs to turn the system off and have it checked.
How furnace repair works
Here’s what a repair visit looks like from the first call to warm air.
1
Call (361) 578-3846 or use our contact page. Tell us what the furnace is doing and we’ll set up the earliest available time.
2
Your technician inspects and tests the furnace to find the cause, checking safety controls along the way.
3
You’ll hear what failed, why, and which options make sense for your system.
4
We go over the repair and its cost with you before the work starts.
5
We make the repair, run the furnace through a full cycle, and confirm it’s heating properly.
Signs you need heater repair
Furnaces don’t usually fail without a hint first.
If any of these sound familiar, it’s time to have your heating system looked at:
Leave the home right away and call your gas utility or 911 from outside. Once the gas issue has been handled, call AAA Air Conditioning Inc. at (361) 578-3846 for heating service.
Repair or replace?
A working furnace with one failed part is usually worth repairing. An old furnace that keeps failing usually isn’t.
We’ll give you an honest read on which side of that line your system is on.
The furnace is in good overall shape
The problem is limited to one part, like an ignitor or flame sensor
Repair costs are modest compared to replacement
It has heated reliably until now
The furnace is older and needs repairs every winter
A major part like the heat exchanger or control board has failed on an aging unit
There’s a safety concern that can’t be repaired cost-effectively
Rooms are uneven and the house never feels warm enough
You’re replacing your AC and want the system matched
Why homeowners call AAA
When the house is cold, it’s tempting to approve whatever gets the heat back fastest. You should still know what you’re paying for.
AAA Air Conditioning Inc. is a licensed Texas HVAC contractor (TACLA #44243C) on Skyline Road in Victoria. We repair heating and cooling systems, so we can look at the whole system instead of just the part in front of us.
Furnace repair cost
The honest answer is that it depends on what failed.
A dirty flame sensor and a cracked heat exchanger can both leave you with no heat, and they’re nowhere near each other in cost. Once we diagnose your furnace, you’ll know the cost before we start. These are the biggest factors:
Ignitors, flame sensors, and capacitors cost far less than blower motors, control boards, or heat exchangers.
Parts for older or discontinued furnaces can cost more and take longer to arrive.
A furnace in a tight attic or crawlspace can take more time to work on safely.
One failure can stress other parts, and a repair sometimes uncovers a second problem.
Gas and electric furnaces use different parts and fail in different ways.
Related services
Furnace Maintenance
A fall tune-up catches worn ignitors and dirty sensors before they fail.
Learn more
Furnace Installation
When repair no longer makes sense, we help you choose a new furnace.
Learn more
Heat Pump Services
Heat pump not heating? We repair those too.
Learn more
Air Duct Repair & Sealing
Cold rooms can be a duct problem, not a furnace problem.
Learn more
Commercial Heating Services
Heating repair for businesses and commercial buildings.
Learn more
Furnace repair service area
Victoria, TX
Home Base
Cuero, TX
Port Lavaca, TX
Refugio, TX
Goliad, TX
Edna, TX
Hallettsville, TX
Ganado, TX
Gonzales, TX
We serve Victoria, TX & Surrounding Areas. Don’t see your town listed? Call (361) 578-3846 and ask.
It depends on what failed. A flame sensor cleaning or ignitor replacement costs far less than a blower motor or control board.
We diagnose the furnace first and go over the repair and its cost with you before any work begins.
Check that the thermostat is set to heat, not just fan. If it is, the burners may not be lighting or may be shutting off early. Ignition problems, a dirty flame sensor, overheating from a clogged filter, or a control issue are common causes.
That usually points to the ignition system. A worn ignitor or dirty flame sensor is a common cause, though gas supply and control problems can look similar. A technician can test it and tell you which.
Make sure the thermostat is set to heat and above room temperature, the breaker is on, the furnace power switch (it often looks like a light switch near the unit) is on, and the filter isn’t clogged. If none of that helps, give us a call.
Some noises are minor, but banging, grinding, or screeching can mean a part is failing. And any burning smell that lingers is a reason to turn the system off. When in doubt, shut it off and call.
Yes. See our Heat Pump Services page for heat pump repair, maintenance, and installation.
AAA Air Conditioning Inc. provides emergency HVAC service for urgent heating and cooling problems. Call (361) 578-3846 to explain what’s happening and ask about current availability.
The sooner a heating problem gets diagnosed, the better the odds it’s a smaller, simpler fix.
Call AAA Air Conditioning Inc. for furnace repair in Victoria, TX & Surrounding Areas. We’ll tell you what’s wrong and what your options are.
AAA Air Conditioning Inc. 175 Skyline Rd, Victoria, TX 77905 • Monday–Friday, 8:00 AM–5:00 PM • TACLA #44243C
